Chop Saw Vs. Miter Saw [ Best Review 2020]

Chop Saw vs Miter Saw

Welcome to our website! Today, I am talking to you about chop saw Vs. Miter Saw. Carpentry industry workers are likely to bump into tools as a chop saw and miter saw during their work.

Let’s define both the tools to have the right information about them. Chop saw is a tool that is used for making cuts that are straight and precise. Contractors use it to make square cuts. They make nice cuts depending on the types of blades invested in them.

On the other hand, a Miter Saw is chop saws that make an angle, compound, and bevel cuts. They make fast and perfect angle cuts. Are slightly versatile when compared to a regular chop saw.

What a chop saw is good for?

  • Makes straight and precise cuts in the wood since they are powerful and accurate tools.
  • Are great for construction also for fabrication projects, especially in commercial and industrial settings.
  • Their efficient, perfect working way and quickly.
  • Making molding or frames because they move up and down and this enables them hence make straight or square cuts.
  • Cut through a variety of different materials such as large sheets of metal and wood.

Can a chop saw be used to cut wood?

Yes, it can. This is because they have large and big blades as compared to miter. The procedure below enables one to cut the wood using a chop saw.

Assemble the materials needed:

materials can be like a circular wood cutting saw blade, crown molding, and baseboard.

Then measure twice and cut once:

you can do this by using a tape measure to get the piece you need. Then use a protractor to acquire the angle you need as well.

You can now set the fence:

put the piece against a straight fence by adjusting the protractor fence against the base of the saw. By doing this, the blade can pivot with the base, thus marking accurate points on your wood. Confirm whether the measurement made on the saw blade are in line with that of the wood. In case there are some mistakes you are allowed to correct them and later perfectly and accurately cut the wood.

Cut the wood:

while cutting ensure that the wood is in position to avoid sliding. This will enable a smooth and quick cut. At times it might not be perfect; therefore, you should use your saw blade to sharpen the wood for its accuracy.

Safety measures

while working, avoid small pieces of wood and tiny cuttings around since they may lead to injuries if not well handled. Protect your fingers by wearing protective gloves 

NOTE:

When cutting the wood, you should blade guard with you. Don’t make tiny cuts they’ll need that you place the hand closer to the cutting edge. This is dangerous because you might hurt yourself.

Chop Saw Vs Miter Saw

  • 15 Amp, 3,800 RPM motor with replaceable brushes provides power and durability for the chop saw
  • Quick-release material clamp of the metal chop saw allows for easy material cutting and removal
  • Cutting fence with miter adjustment of the metal cutting saw allows up to 45 degree angles to be cut
  • Spark deflector provides safety and clear line of sight for cutting
  • Heavy duty steel base provides stability while cutting
  • Spindle lock for easy blade changes

  • Stainless steel miter detent plate of the 12-inch miter saw blade comes with 10 positive stops
  • The mitre saw has a precise miter system and machined base fence support
  • Precise miter system and machined base fence support Cam-lock miter handle with detent override delivers quick and accurate miter angles for DEWALT miter saw
  • Tall sliding fences support 6-3/4-inch base vertically
  • Bevels 0 degree – 48degree left and right
  • 2-inch x 14-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 10-inch dimensional lumber at 45 degree
  • Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings for accuracy and durability
  • Efficient dust collection system captures over 75% of dust generated
  • Oversized, high visibility bevel scale with positive stops.

  • A Chop saw is a tool that is used to make cuts that are straight and precise while a miter saw is a power tool attached with flat miter saw blades that rotate at a great speed to cut wood, plywood, metal, and plastic as well.
  • Chop saw when it’s being used, and it can move up and down while a miter saw can move in different directions.
  • In chop saw the blade is brought to the material to make cuts while in miter saw materials are brought to the blade to make cuts.
  • Chop saw only makes square or straight cuts, but miter saw can make different cuts since you bring to the blade materials to make the cuts of your desire.
  • Chop saw are versatile and relatively cheap while Miter saws are expensive and non-versatile.

Frequently Asked Questions

Q: Can I use a miter saw as a chop saw?

A: Yes, because they are in the same group of the circular blade saws. They’re both a stationary standing alone with a vertically oriented round blade that is pulled downward pivoting arm to cut in metals.

Q: What is the best chop saw in the market?

A: There are several chops saw in the market one has to consider the following features for the best chop saw.

  • It should be small and compact
  • Heat or sparks should not be a build-up
  • Be made of strong and durable materials
  • Have carbide tipped saw blades
  • Spark deflector to add security
  • No coolant is needed
  • Light in weight

Q: Is a sliding miter saw better?

A: Yes, they have rails in them which allow blades to move forward and backwards in between wide material pieces. It’s also better because can cut across a very wide piece of material that a miter saw can’t cut hence increasing the cutting capacity.

 Sliding miter saws are the best, especially while working on projects that will lead to wide boards by using cutting miters and bevels. It enables you to cut thicker pieces of materials. Considering these features, you can make a better choice if you want to use it or not.

Q: Can I put a chop saw blade on a miter saw?

A: Yes, although the blade on the miter saw does more angles compared to that of the chop saw. Also, it can do different picture frames, trim the doors and windows and also mold the materials into different shapes hence enabling the miter saw to be a lifesaver than a chop saw.

Q: Can a chop saw cut wood?

A: Chop saw can cut wood because they can move straight up and down. This means that they can make straight cuts into the wood.

Final Words

In conclusion, although both the miter saw and chop saw play different roles, they are of great importance to a carpenter. Nevertheless, while using a chop saw a carpenter can either cut either wood or metal unlike a miter saw. Hence making the chop saw more vital when compared to the miter saw.

The choice remains in the hands of carpenter on the effective and efficient saw that will make his work easy and give a good working environment.