Best Wet Tile Saw Blade for Porcelain – Comparison Chart w/FAQs

You’ve got a new saw work for porcelain at hand and your motorized wet saw is ready to rip them into pieces. Now what? You obviously need to install a good saw blade that can cut porcelain precisely and effortlessly, right?

If so, then buying the best saw blades for porcelain tile, which are also known as the best diamond saw blades, would be the right choice. Mostly, diamond particle-infused edges are capable of grinding hard materials like marble, granite, ceramic, etc. So, they are the ones you need to target.

Compared to other tile saw blades, diamond blades are hard to find and judge. Because such blades make rigid stones into small usable pieces, which requires an extreme amount of sustainability with accurate teeth alignment.

Not only that, these blades need to cope with higher horsepower and revolutions of your wet saws. Thus, you can’t say finding a good porcelain cutting blade is like putting jelly on butter.


Best Wet Tile Saw Blade for Porcelain – Comparison Chart


Top 5 Best Wet Saw Blades for Porcelain – Reviews

Finding diamond saw blades for cutting abrasive materials are tricky because they don’t actually cut a material, they sharply grind through a direction to divide one thing into two. The infused diamond particles in the steel constructed teeth hit the rock hard and break the inner bonding.

However, we can show you some of the eligible options that can work fine in cutting chippable materials. You can find the best wet saw blade for porcelain among our picks quite easily.


1. Casaverde 10 Inch Diamond Porcelain Cutting Blade

Best Wet Tile Saw Blade for Porcelain - Comparison Chart w/FAQs

Key Features

  • Comes with a ring to make smaller arbor size (⅝”)
  • An ideal option for masonry works
  • Can reduce heat shortly without water
  • Cuts thicker tiles or sheets

Instead of having fewer holes but larger in size, smaller holes with high density will perform better. That’s why Casaverde comes on this list. A key advantage you get from this turbo blade is faster cooling than other ordinary blades.

Besides that, it has most of the features a quality porcelain blade should have. So, it’s a good option to use on most power saws.

Which Tools Support Casaverde Diamond Blade?

By judging the construction and design, it seems that this is a blade for bulk DIY and Jobsite works. So, this blade should work fine with tools like table saw, contractor saw, miter saw, and bridge saw.

Why Is The Product so Costly?

Casaverde 10″ turbo rim is a larger model to cut porcelain or ceramic. It means you can do bulk work using the blade for quite some time. And I think it can surely hold its sharpness even after cutting thick marble sheets. That’s why the price seems way more than it should be.

Can The Product Really Eliminate Vibration?

Vibration-free work with larger saw blades sounds like a dream to some workers. Even so, this dream can come true using this model. The blade can handle a maximum rpm of 6100 without any hiccup. As the blade has a thicker core that directs the whole pressure in center, it can make perfect straight cuts staying really steady.


2. Diex Super Thin Diamond Tile Blade

Best Wet Tile Saw Blade for Porcelain - Comparison Chart w/FAQs

Key Features

  • Thicker bottom to firmly hold the blade mount of saws
  • Well thought design helps cooling really fast
  • Can pierce through a hard stone with minimum effort
  • Less possibility of diamond wearing off

Cutting fast can help you in many ways. People often fear fast cutting as it decreases accuracy. But you don’t have to worry about accuracy and preciseness with Diex Super Thin Diamond blade for porcelain tile.

It is one of the best turbo blades with X teeth to work in redecorating or designing interiors with ceramic and porcelain tiles. Also, it has industry-grade heat sustainability that allows the product to cut hard materials like marbles.This blade can be used for both wet and dry work.

Which Tools Diex Support Super Thin 7” Diamond?

Turbo blades are eligible for most saw works. But for shaping porcelains, they need to be as thin as possible along with less chipping or grinding. This 7″ turbo rim blade is popular for working with both dry and wet porcelain saws. By judging the diameter, the blade is perfect for bridge, table, miter, and hand saws.

What Is The Max Speed This Blade Can Handle?

The turbo blade has no segments or divisions in the edge. Thus, there’s no chance of warping or being out of shape for fast working. You can rip rough materials as quickly as possible, depending on your saw capacity with the product. And don’t worry about cooling down. The hole beneath the edge does that job just fine.

Is the Blade Universal?

This is not a universal option because of the arbor. 7/8″ arbor size can’t fit on other mount sizes firmly. Though the manufacturer provides an extra arbor adjust the ring for 5/8″, the blade won’t go well with 15.8 mm mounts. There are some other variants of this model of different diameters that might be able to work with general arbors.

Is the Rim Thin Enough?

If you look at the edges closely, the edge gets a bit thinner from the rim bottom, as if teeth from both sides have connected each other at the very end. It is to give a positive angle to the edge. Positive angles let you easily go past strong material bonds within seconds. For such a clever design, the product is known as one of the finest turbo models with thinner rims.


3. QEP 6-7003Q 7 Inch Diameter Continuous Rim Premium Diamond Blade

Best Wet Tile Saw Blade for Porcelain - Comparison Chart w/FAQs

Key Features

  • Cuts without making chips or sawdusts
  • Durable enough use on jobsites
  • Dedicated construction for wet saw works
  • Features smooth rips for quite a long time; Best wet tile saw blade for money
  • Works for optimal accuracy

Tired of using blades that chip and ruin your materials? Well, here’s a solution for you. QEP 6-7003Q has genuine anti-chipping technology that hardly pressurizes any area apart from the sawing line.

This model is a slow worker. Thus, it ensures accuracy by giving a neutral angle to the rims. Mostly, the saw blades have some positive angles for perfect cuts. But the QEP Black Gold series mainly focuses on how to bring accuracy without compromising the longevity through compressing the edge.

Which Tools Support QEP 6-7003Q?

Generally speaking, this model is for wet saws, and the diameter indicates the product can perform well with table top saws pretty well. But you can also use it with large handheld saws that are used to plunge or angle cut porcelain tiles for DIY.

How Fast Can the Blade Handle Sawing?

A key issue of this product is not cutting fast nor coping with higher RPM. The RPM capacity of this blade is barely crossing 8000. Besides, you can lose accuracy while trying to work faster with it to shape ceramic or porcelain.

Does The Blade Not Chip At All?

Mainly, thick teeth, negative angles, and excessive grinding create chipping that can ruin a whole tile sheet. But 7003Q has an edge angle that’s just a scale over zero, confirming less grinding. Without worrying about fast cutting too much, the manufacturer hasn’t integrated teeth on the rim. Instead, the Gold diamond series have properly insulated soft diamond bonds for perfect cuts, meaning no chipping while plunging or ripping.

How Many Tiles Can You Cut Using 6-7003q?

There’s no fixed range of how much saw work you can do using the Gold diamond series. But I can surely say that the product is durable because it has a thicker steel construction. On the rim, there are controlled diamond concentrations that cut materials without letting the core absorb too much heat. As there’s no serration or segment, it has no chance to break or warp too soon.


4. GoYonder 4 Inch Super Thin Diamond Saw Blade

Best Wet Tile Saw Blade for Porcelain - Comparison Chart w/FAQs

Key Features

  • Can cut glass if run slowly
  • Performs equally in dry and wet cutting
  • Ensures more than 10000 RPM capacity
  • Compatible with angle grinders

Wouldn’t it be best if your small turbo rim blade cuts faster to save your time and effort? Well, GoYonder Super thin 4” is the right type for such needs.

This 4″ blade is as thin as a penny. The 1.2 mm thickness of the rim can cut larger rocks like granite or marble without making too much material powder. Using this blade is super easy with handheld power saws. Thus, clean cut is a big feature of this product. And as per longevity, you don’t have to worry about the blade being worn out at all.

Which Tools Support GoYonder 4”?

You can find the saw blade’s true potential by using with any handheld circular saw. Because of the small diameter, it is easy to control and works fine with lower RPM. Judging the specs, the model goes well with circular hand saws. But I think a tabletop wet saw can also use this product to cut a surface.

Is the Rim Capable Of Cutting Chip-Free?

The one thing this product lacks is 100% chip-free cuts. Unlike usual continuous rims, it has a mid-hard diamond bond to cut “hard to break” stuff. And theX teeth helps it perform better than others. Together, they might produce faster and accurate cuts, but you can find small chips left after doing saw works.

Can It Cut Both Dry And Wet?

Though it is best to use the continuous rim for wet surfaces, the GoYonger Super thin works well to rip stones as well. The well-aligned X teeth don’t allow the core steel construction to absorb too much heat. Instead, those teeth do some extra grinding along with the blade particles to evenly distribute the pressure and heat.


5. DEWALT XP4 Diamond Blade for Porcelain Tile, 4-1/2-Inch (DW4765)

Best Wet Tile Saw Blade for Porcelain - Comparison Chart w/FAQs

Key Features

  • Diamond particles on both top and side of the continuous edges, almost like diamond coating.
  • Also usable with 7” circular saws.
  • Specialized in cutting small porcelain tiles without water.
  • Maximum RPM capacity is more than 13000.
  • Dedicated blade for ceramic, porcelain, granite, and slate.

Do you know why Dewalt is one the largest growing power tool manufacturers? It is because they make extremely durable stuff. The XP4 blade from the same company I’m now showing is actually one of the most sustainable blades below 7″.

The XP4 blade holds its edges 4 times more than usual blades. The sturdy steel core eliminates blade warping possibility. Moreover, You get to use this with most saw types in the market.

Which Tools Support DW4765?

I’ve found this blade quite handy using with handheld saws and wet tile saws. But the XP4 can work with any circular saw with the same arbor size.

How Fast Can You Cut With Xp4?

The saw blade has nearly a neutral angle at the edge with soft diamond insulation. It increases the speed without letting the materials get chipped. So far, the product has earned a reputation for cutting both dry and wet stones without any issues. But it can’t rip faster like X edge blades.

Can This Continuous Rim Cut Clean?

It can cleanly cut both porcelain and ceramic. But somehow, the older blade models (XP3 and XP2) from the same company cut cleaner than this one.

Is This Saw Blade Universal?

Most probably, it can fit with any general circular saw blade (4.5’’-10” blades) mount. Though it has a fixed arbor size, there’s a brass arbor fitting included. It allows the blade to work with both 7/8″ and 5/8″ saws mostly.


Types of Weit Tile Saw Blades for Cutting Porcelain

The making of every circular blade is almost the same, except the areas that mainly rip an object. Manufacturers create gaps between edges or make holes beneath to give a vibe like fans chopping the air. It cools down hot metal without pouring water. So, the main reason behind giving such designs is to ensure longevity and productivity.

Depending on the rim construction to eliminate heat, we can categorize diamond insulated blades into three different sections.

Segmented Rim Blade

Segmented rim blades are the most common ones used in masonry cutting works. This type has a high capacity for heat regulation and faster cuts.

Most often, segmented blades come with more than 10-12 gaps in the edge. It is to chop the air while spinning and adjust with the room temperature as soon as possible. You can find segmented rims very useful when there’s no water pumping feature in the saw.

  • Cutting Materials: Segmented rims cut bricks, concrete, and hard stones.
  • Best for: Dry saw
  • Heat Regulation: Enabled
  • Cutting Speed: Moderate
  • Cutting Style: Thick grinding through hard materials, not for clean nor thin cuts.

Turbo Rim Blade

Turbo segmented rims also use gapping for cooling down quickly. But the difference is turbo rims might not have huge segments in the edge. Instead of depending on segments, these rims have around 8-10 holes under the edge for chopping air for heat sync.

Turbo rims are considered as the upgraded version of segmented rims. They increase the cutting speed along with ensuring accuracy. And, overall, this type is the best option to use with wet tile saws.

  • Cutting Materials: Turbo rims cut bricks, concrete, marble, granite, ceramic, porcelain, and many other thin or thick materials.
  • Best for: Dry and wet saw
  • Heat Regulation: Enabled
  • Cutting Speed: Faster
  • Cutting Style: Accurate and thin ripping through any material, eligible for clean cuts on some materials.

Continuous Rim Blade

This type is the dedicated wet saw blade. Continuous rims have no gapping or holes in the construction. They totally depend on water to cool down while making pieces of masonry or rocks.

People who intend to do some interior redesigning can do their saw work precisely using continuous edges. This type is mainly used to cut without chips. Users need to ensure break-free free water pumping with their saws to use this type of blade. However, no other blade can cut as clean as continuous rims.

  • Cutting Materials: Continuous rims cut most building redecorating and construction materials despite specialized in cutting thinner tiles or sheets.
  • Best for: Wet saw
  • Heat Regulation: Not enabled
  • Cutting Speed: Slow
  • Cutting Style: Precise and clean cuts without major chipping.

How to Find the Best Wet Saw Blade: A Handy Guide

What can be better than a buying guide when you are unaware of what type of product you have to look for?

To ease pressure from your back, I’ve gathered up all the facts that can clearly let you know which facts make a blade perfect for wet cutting.

Material

There are very few materials better than stainless steel for making a circular saw blade. And SS is quite common too. So, without any debate, choosing stainless steel is a safe play. I’ve also filled my list with SS-made products.

Blade Type

In the last part of our discussion, there are three major rim types mentioned briefly.

Among them, continuous rim and turbo rim blades are the ones for cutting hard and chippable surfaces like porcelain. Segmented blades can’t cut ceramic or similar materials without chipping.

Apart, there’s another type that has gone popular recently, circular rims with X teeth over the edge. It adds extra cutting capacity and pace with diamond grits. Picking such blades can prove a wise decision for faster rips.

Cutting Type

Usually, porcelain tiles get straight cuts. Not too often, they get angle or plunge cuts for masonry purposes.

There are angle grinders available for angle cuts on porcelain or ceramic. Thus, you shouldn’t worry too much about the matter while buying wet saw blades.

Diameter

The diameter varies depending on which type of blade rim you want to have. If your target is to purchase a turbo rimmed product, the preferred diameter range should be around 7″-10″.

But when the choice is a continuous rim, the perfect range turns into 4″-7″. Apart from all those, I suggest 10″ or above blades for professionals who intend doing jobsite works.

Diamond Particle Concentration

The calculation and relation between the diamond bond and grit range are together known as diamond particle concentration. Concentration calculation is not an easy task. However, you can know which range of concentration you require from this list below:

Concentration RangeWhat it features
Nearly 25Eligible for cutting soft and non-abrasive materials
Around 50Commonly used for all materials (recommended for porcelain)
100Best for hard materials and perfectly clean cuts (required for porcelain and other chippable surfaces)

Arbor

Manufacturers commonly keep ⅞” or ⅝” arbors in the blade (4”-10”) to make them universal for power saws. Always try to get a blade with right abor. Or else, the purchase goes in vein.

Segmented Turbo Rim Blade vs Continuous Rim Blade

From the discussion above, it’s clear that only two blade variants, turbo and continuous rims are almost the same by rim structure. People often get confused while choosing between these two.

We don’t want you to spend hours thinking about why these two are different. Hence, let’s compare Continuous rims and turbo rims.

From the chart above, you get to compare both rims within moments and decide which one suits your working style well.

TurboContinuous
Popular Blade Diameter8-14”4-10”
Thickness1.2-1.6”1.6” and above
Temperature RegulationEnabledNot enabled
Water Pump DependencyNot alwaysDependent
Cutting SpeedModerateComparatively slow
Eligible Power ToolsMost type of circular saws with similar arborSpecifically for power saw
Materials to CutBrick, concrete, log, tile, stone, etc.Marble. granite, bone china, porcelain, glass, and other strong chippable materials
Clean CutNot possiblePossible
Cutting MethodRip cut, angular cut, and cross cutPlunge cut, rip cut, angular cut, and cross cut
BondMedium and hardSoft
Diamond GritMid-coarse (20-220)Smooth (80-220)
Diamond ConcentrationControlled (50-75%)Constantly more than 50%
Blade Warping PossibilityHighVery Low
Diamond Wearing off PossibilityVery lowPossible
LongevityDurableLess durable
Perfect Cut Possibility8/109/10
Edge Angle≤5 degreesNearly neutral
Chips & SawdustProduces a lotProduces less
Who Can UseBoth DIY and ProfessionalsPeople having wet saws and plenty experience of sawing
Best Product (from my list)Super Thin Diamond Tile Blade-7”QEP 6-7003Q-7”

Final Thoughts

A big reason why people fail to cut chippable materials cleanly is using a worn-out and unworthy blade with the circular saw.

Whenever you start a new tile cutting work, you must check your older blades on testing surfaces to know whether they are able to cut or not. If not, you shouldn’t delay in buying the best wet saw blade for porcelain, ceramic, and hard stones as older diamond blades can’t be sharpened again when they lose diamond grit or edge angle.

There are 5 best options shown above from both eligible rim types. Along, you’ve got to know about every single detail to differentiate between those two to know which one you need to choose. So, rest is up to you. Good luck!

Leave a Comment